- Activa PermaStone
- Measuring Spoon
- Warm Water
- Mixing Container
- Flexible Plastic Frame Molds: Alphabet Letters
- Fine Sand Paper
- Wood Frame
- Hammer and Nail
Mix compound according to package directions. Add 1.5 parts Perma Stone into 1 part water in a clean, disposable mixing container or bag. Mix gently and slowly until a pancake batter consistency is reached.
Pour the Perma Stone mixture into the prepared mold. Gently tap or vibrate the mold to release any air bubbles.
Allow the Perma Stone to dry. Average setting time is approximately 20-30 minutes.
Loosen the castings from the mold by gently pulling back on the mold’s edges.
Lift the castings completely out of the mold.
File down any rough edges on the castings using sand paper or file.
Brush or spray paint the Perma Stone castings the desired colors.
Place castings in the correct arrangement and glue onto the wooden sign with adhesive.
Hang home decor sign using a nail and hammer. A twin cord can be added for hanging purposes.