PLASTERMIX Plaster of Paris Casting Material
PLASTERMIX Plaster of Paris Casting Material – create castings in color!
As a specially formulated art supply grade plaster, PLASTERMIX Plaster of Paris Casting Material is activated by using 2 parts casting material to 1 part cold water. Check ‘How To Make Plaster’ section below for instructions and best practices.
Hardening or drying times for PLASTERMIX will vary with mold thickness. As a general guideline, please follow these drying time allowances:
- For smaller moldings, less than 1” thick, allow 20 - 30 minutes.
- For larger moldings, more than 1” thick, allow 45 – 60 minutes.
Sandtastik® PLASTERMIX is the perfect craft for kids birthday parties, classroom projects, camps, and at home.
Color: Arctic White
Packaging: 5 lb (2.3 kg) Resealable Pouch
Ages: 4+ (adult supervision)
Certif: ACM 'AP' Non-toxic
Conforms to ASTM D-4236
How To Make PLASTERMIX Plaster of Paris Casting Material
INSTRUCTIONS – FOR BEST RESULTS
1. Measure 1 part PLASTERMIX Plaster of Paris Casting Material to ½ part water
NOTE: Using warm water will accelerate material hardening. It is recommended to use cold water to allow for adequate setup.
2. Stir contents until you obtain a smooth consistency.
3. Pour into desired mold.
4. Let dry approx. 45-60 minutes. Drying times will vary for large castings.
5. Remove casting from mold.
6. Ready to decorate.
Frequently Asked Questions
Q. What’s the ratio for mixing PLASTERMIX Plaster of Paris Casting Material with water?
A. 2:1 (2 parts plaster to 1 part water)
Q. What consistency am I looking for in my plaster-and-water mixture?
A. Initially the mixture will seem quite watery when mixed at a ratio of 2 parts plaster to 1 part water. As PLASTERMIX Plaster of Paris Casting Material begins to react and temperature starts to climb, it will slowly become thicker and thicker until finally solidifying. Remember to use cold water to allow for a greater drying time.
When mixed with water, this material hardens and produces heat quickly. DO NOT attempt to make a cast enclosing any part of the body using this material. Dust from mixing may cause irritation to eyes, skin, nose, throat and upper respiratory tract Use only in a well-ventilated area. It is recommended to wear face and eye protection. If eye contact occurs flush thoroughly with water for 15 minutes. If on skin Wash with plenty of water If swallowed and/or irritation persists, call physician.