Materials Needed:
- Activa PermaStone
- Measuring Spoon
- Warm Water
- Mixing Container
- Silicone Cactus Mold
- Fine Sand Paper
- Paint
- Adhesive
- Magnet
Step 1
Mixing
Mix compound according to package directions. Add 1.5 parts Perma Stone into 1 part water in a clean, disposable mixing container or bag. Mix gently and slowly until a pancake batter consistency is reached.
Step 2
Pour
Pour the Perma Stone mixture into the prepared mold. Gently tap or vibrate the mold to release any air bubbles.
Step 3
Drying
Allow the Perma Stone to dry. Average setting time is approximately 20-30 minutes.
Step 4
Removal
Loosen the castings from the mold by gently pulling back on the mold’s edges.
Lift the castings completely out of the mold.
Step 5
Smooth
File down any rough edges on the castings using sand paper or file.
Step 6
Paint
Brush or spray paint the Perma Stone cactus casting.
Step 7
Magnet
Turn casting over and apply a magnet to the backside using adhesive.
Step 8
Display
Place the cactus magnet onto a metal surface for use.
/> 
/> 
/>