Summer Special
Summer Special
Sign up for our newsletter to get a coupon!
Sign up for our newsletter to get a coupon!
MagicColor 'Monsters Keep Out' Door Sign

SKILL LEVEL: Difficulty 1-5 (1 is easiest): 2

TIME TO COMPLETE: 2 hours not including dry time

Supplies

  • Magic Color Plaster Casting Boys Kit, mold #7 (DINOSAUR MOLD, 1 RED PLASTER)
  • Unfinished wooden plaque
  • Plastic zip-lock baggie (sandwich size)
  • Acrylic paint: yellow, light blue, royal blue, green, red
  • Glue
  • Wiggle eyes
  • Container for water
  • Paper towels
  • Small plastic bucket
  • Paint Brushes

PROJECT TIP

  • Read and follow manufacturer’s instructions for all products used.
  • Be creative, come up with your own ideas on how to decorate your finished pieces, or use the photo as a guide when decorating your projects.
  • When it’s clean-up time, use a small bucket or container of water to clean your hands and the molds instead of the sink. Do not expose sink or plumbing to plaster or plaster residue.

Directions

STEP 1  Following directions as given on package, place the Magic Color Plaster in a plastic baggie. Next pour the water in the baggie one tablespoon at a time and zip it shut. Watch the magic color change happen as you mix and knead plaster together with fingertips until there are no lumps and mixture is smooth.

STEP 2  Use scissors and cut off a .” of the end of one corner of the baggie and squeeze plaster out of baggie into the mold, filling it; discard baggie. Lift mold and tap gently several times on work surface to release air bubbles. Allow 30 minutes for plaster to set up.

STEP 3  While plaster mold is drying, paint the wooden plaque with two coats of yellow allowing drying in between. Then hand letter or stencil saying in place “ Monsters keep out!” in red and trim edge in red as well. Let dry.

STEP 4  When plaster has set, carefully remove dinosaur from mold by gently flexing plastic mold back and forth, until plaster piece releases. Wash off molds in a bucket of water with soap and water until clean. Pat molds dry with paper towels or rags.

STEP 5  Paint dinosaur by adding blue and green details and red polka dots, or as desired. Allow it to dry and then glue to front of plaque. Let dry.

STEP 6  Glue wiggle eyes in place.